應用方案主頁 > 新聞中心 > 應用方案 > 信陽河卵石制砂機，時產200噸河卵石破碎制砂生產線
河卵石破碎制砂生產線技術方案（全流程版）
一、產線概述
- 適應物料：河卵石（莫氏硬度7+）、花崗巖等中高硬度石料
- 核心工段：粗碎→中碎→細碎→制砂→篩分→洗砂（可選）
- 標準產能：50-500噸/小時（模塊化設計，支持定制）
-
成品規格：
- 0-3/5mm（精品機制砂，級配可調）
- 5-10mm、10-20mm（骨料，用于混凝土/瀝青）
二、設備配置方案
| 工段 | 設備選型 | 關鍵參數 | 作用說明 |
|---|---|---|---|
| 初級破碎 | PE顎式破碎機（PE600×900/PE750×1060） | 進料≤630mm，處理量80-320t/h | 大塊河卵石初破，降低后續負荷 |
| 二級中碎 | HPT多缸液壓圓錐破（HPT200/300） | 進料≤241mm，產量100-500t/h | 層壓破碎，減少針片狀含量 |
| 制砂整形 | VSI6X立軸沖擊破（VSI6X8528/1150） | 進料≤55mm，成砂率≥60% | 立方體整形+好的制砂 |
| 篩分系統 | 3YK/4YK圓振動篩（多層篩網） | 分級精度±0.5mm | 實現砂、石精準分離 |
| 洗砂除粉 | XSD輪斗洗砂機+細砂回收機 | 洗凈度≥95% | 控制含粉量（可選干法生產） |
| 智能控制 | PLC更好控制系統 | 實時監測產量、電流、溫度 | 故障預警+遠程調控 |
三、工藝流程
-
粗碎階段：
- 河卵石經給料機均勻送入顎破，破碎至≤200mm
- （針對高含泥量原料可選配預篩分）
-
中細碎階段：
- 圓錐破實現閉路循環（未達標石料返回二次破碎）
-
制砂篩分：
- VSI6X制砂機破碎+整形→圓振篩分級→合格砂進入成品倉
-
環保處理：
- 干法工藝：脈沖除塵+霧炮抑塵（粉塵≤10mg/m³）
- 濕法工藝：洗砂機+沉淀池（水資源循環利用）
四、技術優勢
? 高成砂率
- VSI6X制砂機“石打石”+“石打鐵”雙模式，成砂率比傳統設備提高20%
? 耐磨設計
- 圓錐破采用錳鋼襯板（壽命≥8000h），制砂機拋料頭可360°調換使用
? 靈活擴展
- 支持模塊化增減設備（如增配移動破碎站、砂石同出系統）
? 低能耗
- 噸砂電耗≤1.8kWh（相比棒磨機節電50%+）
五、案例參考（信陽200t/h項目）
- 原料：河卵石+花崗巖混合料（抗壓強度≥150MPa）
-
實際運行：
- 成品砂細度模數2.7-3.0，含泥量≤1.5%
- 應用于商混站，替代天然砂成本降低30%
注：可提供EPC交鑰匙服務，含場地規劃、設備安裝調試及人員培訓。
河卵石破碎制砂生產線河卵石破碎制砂生產線常見方案及設備清單
河卵石破碎制砂生產線主要包括破碎制砂篩分給料輸送洗砂及控制系統等,今天小編跟大家分享一下河卵石破碎制砂生產線常見配置方案及設備清單...
河卵石破碎制砂生產線河卵石破碎機,河卵石制砂機,河卵石制砂生產線,短流程制砂生產線
新型河卵石制砂生產線指的是轉子離心式制砂機以下簡稱制砂機與鄂式破碎機的黃金搭檔,之所以稱之為新型,是因?yàn)槭褂眠@種制砂生產線配型方案,可以變?nèi)嗡亩?..
河卵石破碎制砂生產線河卵石破碎制砂生產線
河卵石破碎制砂生產線機制砂河卵石鵝卵石制砂流程.海螺緬甸時產150噸石灰石破碎生產線.河卵石鵝卵石制砂流程分為粗碎細碎制砂篩分和洗砂回收三個階段。...
河卵石破碎制砂生產線河卵石制砂生產線
河卵石破碎制砂生產線的工藝流程普通制砂生產線流程解析通常河卵石制砂生產線會由破碎制砂設備以及配套輔助設備共同構成,破碎制砂設備流程順序?yàn)轭€式破碎機破圓...
河卵石破碎制砂生產線河卵石破碎制砂生產線
河卵石破碎制砂生產線原創完整版在線觀看河卵石破碎制砂生產線原創在線觀看完整版河卵石破碎制砂生產線原創高清視頻在線觀看河卵石破碎制砂生產線...
河卵石破碎制砂生產線湖南時產350
浙江鵝卵石制砂生產線河卵石破碎生產線河卵石破碎生產線配置標準規范年產100萬噸河卵石加工方案時產20噸河卵石制砂機破碎制砂生產線河卵石破碎生產線120河卵石破碎機大型河卵石全液壓制砂機河卵石制砂機廠家浙江鵝卵石破碎機鵝卵石破碎制沙項目湖南時產35噸河卵
河卵石破碎機,河卵石制砂機,河卵石制砂生產線,河卵石碎石機價格
優點是結構簡單合理,可以用多種動力機器驅動,可以篩出不同粗細的物料。河卵石破碎制砂生產線。廠家介紹
面對金融危機，雖然國家出臺了很多政策，鼓勵金融機構扶持中小企業發展，給予信貸傾斜，但是，從信貸投放情況來看，絕大多數資金還是流向國有企業。
從而導致了，國有企業的錢用不完，而中小企業貸不到款，原因就是更殊時期，中小企業民營企業缺乏抵押擔保，不符合金融機構金融危機期間的貸款原則。在巖石中石英常為無晶形的粒狀，在晶洞中常形成晶簇，在石英脈中常為致密塊狀。無色透明的晶體稱為水晶，另外還有含有雜質而帶顏色的紫水晶含錳煙水晶含有機質薔薇石英又叫芙蓉石，含鐵錳等。礦區范圍跨縣以上行政區域的，由所涉及行政區域的共同上更好登記管理機關審批登記，頒發采礦許可證。
縣以上地方人民政府負責地質礦產管理工作的部門在審批發證后，應當逐向上更好人民政府負責地質礦產管理工作的部門備案。2011年下半年，國家宏觀調控政策的不斷出臺使上半年一直居高不下的房?jī)r(jià)、肉價開始了不同程度的下跌，這使得房地產相關的鋼鐵行業更是雪上加霜。現階段，鐵礦石價格進入下滑通道，有效降低成本是鋼鐵企業關注的問題。
Henan LIMING Heavy Industry Science and Technology Co. LTD which mainly manufacture large and medium-sized crushing and grinding equipments was founded in 1987. It is a modern joint-stock corporation with research, manufacturing and sales together. The Headquarter is located in HI-TECH Industry Development Zone of Zhengzhou and covers 80000 m ². Another workshop in Shangjie Industry Park covers 67000 m ². Over the more than 30 years, our company adheres to modern scientific management system, precision manufacturing, pioneering and innovation. Now LIMING has become the leader in domestic and oversea machinery manufacturing industry.
LIMING brings a large number of high-qualification talents together. Bai Yinghui, general research and development engineer, is a well-known expert in crushing and grinding area who won the youth medal of technology of the state council and receives special government allowance. LIMING owns an experienced service team, offering the customer free design and professional skill training and live guide for installation and debugging. The company's service networks have spread all over the country. Established client files, and mix the traditional door-to-door service with online service together, complementary the advantages. LIMING has won high recognition from clients.
The company mainly manufactures mobile crushers, stationary crushers, sand-making machines, grinding mills and complete plants that are widely used in mining, construction, highway, bridge, coal, chemical, metallurgy, refractory matter, etc. Product quality is life, and scientific innovation is motive power. LIMING got ISO international quality system certification, European Union CE certification and Russian GOST certification. The company has strong research and development strength and innovation.
LIMING machinery research institute was founded in 2005 which is the most powerful comprehensive technological research institute in the domestic mining machinery industry and provides top scientific research platform for professional personnel. Up to now, LIMING has won 10 national patents, 24 national utility model patents and 3 provincial science and technology achievement awards. The company products remain the international leading level by strengthening international exchanges and cooperation all the time, and has won a wide range of international market, such as Russian, Azerbaijan, Kazakhstan, Turkey, Kuwait, South Africa, Egypt, Vietnam, Malaysia, India, Australia, Korea, Canada and European Union,etc. Through more than 30 years' hard work, LIMING's staff built supremacy of credibility, excellent quality, service "LIMING" brand, and has made outstanding contributions to the development of mechanical manufacturing industry for China and the whole world.
現場視頻如下：
相關新聞:
Copyright ? 2011 黎明重工 | 免費在線客服>>機制砂設備價格 機制砂設備導航: |VSI6X制砂機 |5x制砂機 |VSI制砂機 |PCL制砂機 |VUS骨料優化系統 |VU骨料優化系統 |顎式破碎機